Best Badge Holders Reviews & Buyers Guide 2020

Identity cards are an important part of professional life. It’s protection being equally essential. Therefore, badge holders play a great role for us. They ensure safety as well as often help us keep our badges close to us.

The badge holders also help you swipe or show your cards every day, without letting you lose them. To get you the best protection for your ID cards, we have brought the best 10 Badge holders to you.

You may read this: Top 10 Best DJ Lights For Party 

Best Badge Holders List 2020

GOVO Badge Holder/Wallet:

With the polycarbonate body and screen and steel fasteners, it becomes one of the most durable badge holders. It helps you carry your ID in multiple ways, including with a lanyard, keychain, carabineer, or clip it on a belt, pocket, backpack, or wherever you desire. It can serve you as a badge holder cum wallet as it can hold up to 4 cards.

GOVO Badge Holder/Wallet - Durable Polycarbonate ID/Credit Holder with Metal Clip and 4 Cards Slot (Holds 1 to 4 Cards) (Blue)
  • DURABLE AND LIGHT WEIGHT: The holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners. Weights 1.4 oz.
  • PATENTED CLIP: The first and only badge holder with a metal clip allow you to carry your ID on your belt, pocket, key chain, backpack or a lanyard. The opening on top of the clip is designed for connecting to lanyard or carabiner. The clip is made from manganese steel making it strong and durable.
  • PATENTED SPRING-LOADED CARD HOLDING SYSTEM: It holds cards well no matter it is loaded with 1 card or 4 cards. The spring holds cards on the sides so it won’t damage your cards or let them slip out. Unlike plastic retainer, metal spring does not lose elasticity.
  • DOUBLES AS A WALLET: The GOVO T4 can be used as a wallet thanks to its’ 4 cards capacity. You can carry your credit cards, driver license and work ID all in one in this compact holder. The steel clip can also be used as a cash clip.


  • Material: Body: Polycarbonate | Fastener: Steel
  • Body Dimensions: 3.8 x 2.6 x 0.38 inches
  • Weight 2.11 ounces
  • Total card slots: 4
  • Orientation: Vertical

Pros & Cons For GOVO Badge Holder/Wallet

  • Tactical and durable
  • You can hang wherever you like in whichever manner
  • Can be used as a wallet
  • Beautiful design with scratch-proof quality
  • Expensive
  • Heavy
  • Noisy
  • Breakable


ELV Badge Holder:

An extremely comfortable badge holder with one clear ID window, one open card slot, three covered card slots and one RFID blocked cash slot with zipper pocket. The ID window gives you access to the scan with protection to your card. With the detachable neck, it can easily act as a wallet.

ELV Badge Holder with Zipper, PU Leather ID Badge Card Holder Wallet with 5 Card Slots, 1 Side RFID Blocking Pocket and 20 inch Neck Lanyard Strap for Offices ID, School ID, Driver Licence (Black)
  • BADGE HOLDER STRUCTURE: 1 Clear ID window + 1 open card slot with PULL TAB (Front) + 3 covered card slots ( back) + 1 RFID BLOCKED cash slot with zipper pocket (side). ID window with clear cover features visibility and protection, makes it easy to scan ID Cards. Front anf Back Card Slots for easy management and access. ID's, event or location passes, name cards or business cards , cash, keys - all of these could fit into this specially designed PU LEATHER badge holder.
  • MATERIAL: ID holder and lanyard are made by PU leather, and combine with top grade hardware with safety side zipper and back closer. No need to worry about cards could accidentally slip out or lanyard rips any more.
  • INNOVATION DESIGN: Great Badge Holder for those need multiple badges, cards, tickets and money (Offices, Airports, Government Employees and More), suitable for ID badges, School ID, drivers license, laundry card, debit cards, etc. This badge holder with large capacity.
  • SIZE: Holder Size: 4.8"L x 3.5"W(12.2cm x 8.9cm); 20"lanyard full round length
  • STRONG LANYARD: 1pc strong yet soft 20" PU Leather detachable Neck Lanyard for the holder


  • Material: PU Leather
  • Dimensions: 4.8″L x 3.5″W (12.2cm x 8.9cm)
  • Weight: 1.76 ounces
  • Total card slots: 5
  • Orientation: Vertical

Pros & Cons For ELV Badge Holder

  • The strong but soft lanyard of 20”
  • Zipper Closure
  • Cheap
  • ID falling is no issue
  • The front window is not scratch-proof
  • Due to the RFID, the scan might get difficult with the card inside
  • Quality sacrificed


ID Stronghold – RFID Blocking Secure Badge Holder:

With an extremely lightweight, it is durable protection to your card. Can hold two cards. Provides RFID protection. If you intend to remove your IDs daily from the holder, this is your right pick. It becomes comfortable with its easy slide access. A quality tested holder that can be relied on.

ID Stronghold - RFID Blocking Secure Badge Holder - Duolite 2 Card ID Holder - Poly Carbonate - Heavy Duty Hard Plastic ID Badge Holder - USA Molded and Assembled - FIPS 201 Approved - Black
  • 2 CARD HOLDER: Conveniently carry two key cards, held tight so you never lose your identification.
  • RFID SHIELDED: Protect your credentials with our FIPS201 Approved badge holder, for 13.56mhz cards.
  • INDESTRUCTIBLE: Molded from Poly Carbonate for military level toughness and durability.
  • SLIM DESIGN: Looks sharp and available in 9 colors to match your uniform, work or business attire.
  • USA Designed, Molded and Assembled - Our slim polycarbonate frame is tough as nails and will last you for years!


  • Material: PolyCarbonate
  • Dimensions: 4 x 2.38 x 0.31 inches
  • Weight: 0.71 ounces
  • Total card slots: 2
  • Orientation: Vertical

Pros & Cons For ID Stronghold – RFID Blocking Secure Badge Holder

  • Extremely light-weighted
  • Available in 8-9 different colors
  • FIPS201 Approved
  • Slim Design
  • Easy slide
  • RFID might create problems for scan
  • The card might slip off after some time of use
  • No attached lanyard or hook


OneTigris Tactical ID Card Holder:

A handy badge holder cum wallet which, you can wear both vertically as well as horizontally. Nylon made product that can serve you with quality besides strength. It contains one clear window for your ID card and three other slots that can contain up to two cards each. Additionally, it has a detachable hook and loop.

OneTigris Tactical ID Card Holder Hook & Loop Patch Badge Holder Neck Lanyard Key Ring and Credit Card Organizer (Black)
  • OneTigris SHOT PUT Card Holder: Detachable hook & loop front part with a clear window for main ID card & Wallet like micro-mesh card holder x 3 in the back(fit 2 credit cards each)
  • Light, solid, easy-access EDC wallet, and it can be worn both horizontally and vertically
  • This badge holder side has a retaining strap to provide extra security
  • Tactical ID Holder with Elastic Pen Loop: Matte black split ring for keys, lanyard, carabiners
  • Dimensions: 5.1"L * 3.3" W (13 * 8.5 cm)


  • Material: Cordura Nylon
  • Dimensions: 5.1″L * 3.3″ W (13 * 8.5 cm)
  • Total card slots: 4
  • Orientation: can be used as vertical as well as horizontal

Pros & Cons For OneTigris Tactical ID Card Holder

  • Lightweight and durable
  • Contains a pen holder
  • Contains retaining strap
  • Stretchable
  • Delicate Velcro arms
  • Since Nylon, the threads may create problems


Union Made Leather Badge Holder:

An all in one wallet cum cardholder at one end from the reputed Specialist ID. Includes sections for ID, cash, card and key ring. The lanyard as well is made of leather. It holds a quality you can trust with genuine leather.

Union Made Leather Badge Holder - USA Manufactured Heavy Duty Four Pocket ID Badge Wallet with Lanyard by Specialist ID
  • UNION MADE - Designed, Manufactured, Sewn, and Assembled Right Here in the USA!!
  • ALL IN ONE - FOUR Top Load Pockets (Including Clear ID Window) for ID, Cards, Keyring, and Cash
  • RUGGED, STRONG & SECURE - Four Top Loading Pockets Hold Your ID, Cash, and Cards - Reinforced Strap, Lanyard and D-Ring - Perfect for All Your Prox, RFID, TWIC, CAC, Smart Cards, and any Swipe, Tap, or Display Photo Identification
  • SEE, FEEL and SMELL THE DIFFERENCE - Fine Genuine Leather - Sourced From Latin America
  • DURABLE - Great for Your Uniform - Office, Security, Police, Education, Medical, Airport, FAA, TSA, Pilots, DHL (Department of Homeland Security) and More! - 19" Lanyard / 3" X 4 3/8" Badge Holder & 1" Key Ring


  • Material: Leather
  • Dimensions: 5.31 x 3.9 x 0.04 inches
  • Weight: 0.81 ounces
  • Total card slots: 4
  • Orientation: Vertical

Pros & Cons For Union Made Leather Badge Holder

  • High quality, made in USA
  • Durable and cost-efficient
  • Light-weighted
  • Good Design
  • Expensive
  • May break if used roughly


Wisdompro 2-Sided PU Leather ID Badge Holder:

It contains one ID window, four cardholders and one side zipper that can be allowed to keep your pocket essentials. An absolute multi-functional product where lanyard comes along. It is lightweight and detachable at the neck, therefore comfortable. It has a thin, stylish look that you can carry anywhere. You can get this product in both vertical as well as horizontal orientations.

Badge Holder with Zipper, Wisdompro School Supply 2-Sided PU Leather College ID Badge Holder with 1 ID Window, 4 Card Holder Slots, 1 Side Pocket and 20 Inch Leather Neck Strap Lanyard -Vertical Black
  • Product features: Front ID Window with Clear Cover features visibility and side zipper pocket for cash, keys and other small stuff; Non-full 3 card sized Back and 1 card sized front Card Slot for easy management and access
  • Highlights: Badge Holder are Made of Premium Durable PU leather; 1pcs 20" Lightweight, Comfortable, Strong, Premium Polyurethane leather Double Stitches Neck Straps Lanyards with Heavy Duty Metal J-Hook; Side zipper is sturdy yet zip up and down smoothly that will securely store your valuables and make sure it won't fall out.
  • Multi-purpose: . Perfect for everyday uses; teachers, students, stuff, doctor, businessman, journalists, engineers, government employees, medical professionals, retail and shop workers, restaurant and café/bar workers, sales persons, managers - everyone! Good Choice for College, Office, School, Cruise, Jobsite, Convention, Home or Special Event Uses!
  • Product size: The Badge Holder size is about: 2.8”x4.7”(7x12cm); window pocket 2.54"x3.6"(6.5x9.2cm); other pockets 2.54"x3" (6.5x7.6cm) & zipper pocket 3.93"x2.5"(10x6.4mm) approximately
  • Wisdompro Value Set includes 1 x PU Leather Badge Holder; 1 x 20" PU Leather Neck Lanyard


  • Material: PU Leather
  • Dimensions: 5.08 x 3.94 x 0.51 inches
  • Weight: 1.41 ounces
  • Total card slots: 5
  • Orientation: Available in both vertical as well as horizontal

Pros & Cons For Wisdompro 2-Sided PU Leather ID Badge Holder

  • Durable and cost-efficient
  • Cheap
  • Great look
  • 20” lanyard
  • Includes zipper to hold other stuff
  • The lanyard holder is delicate


Witz See it Safe Waterproof ID/Badge Holder Case:

A good quality product made with O-rings that keep it water and dustproof. It can float over water in case it falls over it. The plastic at the same time is crush resistant and, therefore, secure.


  • Material: Plastic
  • Dimensions: 5″ × 2.375″ × .50″ (8.89 cm × 6.0325 cm × 1.27 cm)
  • Total card slots: 1 wide slot which can hold up to 5-7 cards
  • Orientation: Vertical

Pros & Cons For Witz See it Safe Waterproof ID/Badge Holder Case

  • Waterproof
  • Dustproof
  • Crush Resistant
  • Cost-efficient
  • The plastic connector or the hook can break


EYLION 10 Heavy Duty ID Card Badge Holder:

A not so complicated and just one pick product. You can wear it in multiple ways be it with lanyard, keychain or retractable carabiner reel clip. A pressing zip at the end ensures the safety of the insides of the cards also which is reusable.

KEYLION 10 Pack ID Card Badge Holder Vertical, Heavy Duty Clear Vinyl Plastic PVC Sleeve Cover w Waterproof Resealable Zip, fit 5 Credit Size Cards or 2-1/4" x 3-1/2" Name Badge Inserts
  • Large & Roomy Space. I'd Sleeve/pouch/cover protector Outer Dimensions: 4.6" L x 2.81" W , Inner Dimensions: 3.54" L x 2.6" W. Compatible with Avery Name Badge Inserts 5390 / 05390, 2.25 x 3.5 Inches, comfortably fits 1-5 pcs of credit card or driver's license sized cards.
  • Durable PVC (poly vinyl chloride) material, wear-resistant and corrosion-resistant properties. The Single layer thickness of this id badge holder is 0.4mm compares to 0.25mm or even thinner of generic items on the market. It's soft, smooth and durable, never leave creases or break even if folded repeatedly.
  • Waterproof and Dustproof: Easily open and close with the excellent resealable zip closure. This waterproof and dustproof id card holder is great to keep your important paper badges or cards dry, clean and secure. I.D Holder Pre-punched Dual-use hanging slot/holes design, the middle slot for lanyard, keychain or retractable carabiner reel clip, the both side holes for the cord/strap/string/thread.
  • ECO & Safe: The name badge holder is made of premium PVC material, REACH and RoSH certified. No recycling plastic scrap, no heavy metal pollution, non-toxic, odorless and safe guaranteed. That makes the lanyard id holder high transparency and crystal-clear. Stay as new after long term use.
  • Buy with confidence: Perfect badge holder fit for ID cards, credit cards, work card, nurse name card, student card, membership card, bus pass, exhibition card, hotel key cards, cruise cards, luggage tags etc. Please don't hesitate to contact us via Amazon message system if at any time you aren't completely satisfied with your purchased.


  • Material: Poly Vinyl Chloride (PVC)
  • Dimensions: 4.6 x 2.8 x 0.6 inches
  • Weight: 2.9 ounces (for a pack of 10)
  • Orientation: Vertical

Pros & Cons For EYLION 10 Heavy Duty ID Card Badge Holder

  • Completely transparent
  • Flat and good looking
  • Good quality plastic
  • Durable and flexible
  • Slightly bigger than rest that allows easy entrance to the cards
  • Waterproof
  • Easily scannable
  • Might provide you shorter life span
  • Plastic smell may come when new


Ergodyne Squids 3386HV High Visibility Arm Band ID/Badge Holder:

An ID badge holder for arms. It is made of elastic hook and loop. It is said to have a clear visibility. Appropriate for workers at the construction sites and places. A high-quality vinyl material to protect your card.

Ergodyne - 19951 Squids 3386HV High Visibility Arm Band ID/Badge Holder Hi-vis Orange
  • ID & Badge Holder: Worn around arm to keep ID out of the way. Also shows off "the guns" nicely
  • Durable vinyl construction
  • Products ID badge
  • 4.75" x 3" (12.1cm x 7.6cm)


  • Material: Vinyl
  • Dimensions: 5.5 x 0.75 x 4.5 inches
  • Weight: 0.8 ounces
  • Total card slots: 1
  • Orientation: Vertical

Pros & Cons For Ergodyne Squids 3386HV High Visibility Arm Band ID/Badge Holder

  • Cheap
  • Adjustable strap
  • Scannable
  • Durable
  • Light-weighted
  • Not waterproof
  • Velcro strap not durable
  • The vinyl holder might crack on heavy-duty


Specialist ID Vertical Top Load Three Card Badge Holder:

An easy top slip-in ID holder that can hold up to 2 – 3 cards at a time. Made of hard plastic that ensures quality and security. It contains a detachable keychain with a metal badge clip and can carry work badges and keys. One of the best pickup options for scan and swipe.

Specialist ID Vertical Top Load Three Card Badge Holder - Hard Plastic with Heavy Duty Breakaway Lanyard w Quick Release Metal Clip & Key Ring (One Holder / 3 Cards Inside) (Black)
  • RIGID & RUGGED POLYCARBONATE PLASTIC - Hard Plastic Vertical Format I.D. Badgeholder with Heavy Duty Safety Break Away Neck Cord Lanyard - Protect Your Valuable Access, CAC, PIV, TWIC or Government Employee Name Badge from Damage and Loss
  • TOP LOADING & FULLY ENCLOSED FOR 2 - 3 CARDS - All Cards Load from Top of Sturdy Rigid Case (Can Hold 3 Standard CR80 30 Credit / Drivers License Sized Badges)
  • CLEAR FRONT WINDOW - Front Badge Has Visible Display for Picture ID’s , Dual Thumb Lever on the Back Can Slide up Smart Chip Cards or Swipe & RFID Prox Access Cardbadges
  • QUICK RELEASE LANYARD with SAFETY BREAKAWAY CLASP - Features a Detachable Keychain with Metal Badge Clip - Carries Your Work Badges and Keys
  • CARRY ALL YOUR CARDS IN ONE HOLDER - Tough Multi-Card Protector Holds Common Access SmartCards and Proxy Key-cards in One Case - Perfect for When Needed on a Regular Basis (FAA, Port Authority, Security Access, TSA, Military, Customs, and Department of Homeland Security)


  • Material: Hard Plastic
  • Dimensions: 4.4 x 2.8 x 1.1 inches
  • Weight: 1.6 ounces
  • Total card slots: 1 (that can hold up to 3 cards)
  • Orientation: Vertical

Pros & Cons For Specialist ID Vertical Top Load Three Card Badge Holder

  • Holds up to 3 cards
  • Easy scan and swipe
  • Detachable keychain
  • Good quality
  • Delicate lanyard holder


Buyer’s Guide:

If you see some most common pictures of a workplace, each of them would include employees carrying badges with them. Therefore, the badge holder plays a vital role in our professional life and all of us need one for the protection of our card that represents our identity.

Above, we have mentioned the dome of the bests, you can go. But before you go for one, you will have to make sure of your requirements and necessities. Some of which includes:

  1. Your purpose: you just want to carry your ID card or you need some of your pocket equipment to carry along.
  2. Where and how do you want to carry it: Whether you want a lanyard, a hook or arm ID, etc.? This would change your choice.
  3. What material you would like to use: There is a wide variety of holders you can choose from for your ID.
  4. You need to scan or swipe: The badge holders containing RFID creates a problem for scanning or while you swipe your ID card for entrance. You shall have to keep this in mind if this is your daily procedure.
  5. Consider the size of your card: you must check the holder’s size before you go for one. Your card must fit into it.

Apart from these, some more requirements that you shall have to take care of are whether waterproof, dust or scratch proof, etc. according to your needs.


Types of Badge Holders:

You can broadly classify badge holders into 5 types:

  1. Transparent or Vinyl badge holders: with simple plastic materials to carry your ID
  2. Waterproof badge holders: One that can carry 4-5 or more cards together in one holder and protects it from water, dust, etc.
  3. Arms badge holders: the ones tied at arms mostly by construction site workers
  4. Shielded badge holders: the ones that contain maximum protection, RFID security for your ID cards.
  5. Wallet cum badge holders: the ones that contain ID window plus extra pockets for carrying your pocket essentials.


Frequently Asked Questions:

Answering some of the most frequently asked questions about Badge Holders:

  • What are the badge holders and lanyards?
    • A badge holder helps you secure your ID cards and carry them wherever and whenever you need them.
    • A lanyard is worn around the neck or wrists that allow you to attach your holders.

  • What are retractable badge holders called?
    Retractable badge holders or reels are another way you can carry your badges to display your ID. The help you attach your IDs to your belts, pockets, etc.

  • What is the importance of a badge holder?
    It protects your card from various environmental changes and conditions and helps you keep it close to you.

  • How do I hang ID cards?
    There are various ways you can carry your ID cards. Some of the most common ones are using lanyards, reels, arms badge holders, strap clips, pins or hooks.

  • What is the best ID badge holder?
    Mentioned some you can go for in the above article.


Wrapping Up,

ID Badge Holders are one small but essential part of one’s executive life as it ensures the protection to our Identity representatives. You must choose the right piece according to your usage and demands so that you do not regret the purchase and it does not become a headache to your already hectic working schedules.

Leave a Comment